Turn the table frame upside down unscrew the screws preferably using a drill. Removing the legs- the final step after dismantling the pockets, rails, felt and slate is removing the legs of the table. Note that the slate is very heavy and you should get assistance lifting it.ģ. Thus, using a drill, you are going to remove the screws gently and once done set the slate aside on the floor or against the wall. The slate is made of a rock, which can break or chip if not properly handled. Once the felt is out, you can now clearly see the slate. You must do it gently so that you do not tear the felt. All you need is a staple remover to the felt. Felt and slate removal- to remove the slate safely without breaking it, you first take out the felt. Keep the bolts and screws well such that you will know which part they will be fastening later.Ģ. With the pockets out, you can now remove the rail bolts so that the rails can come out. Use a staple remove if held with staples or unscrew using a screwdriver if screws are used. Removing pockets and rails- the first step in disassembly is the removal of rails and pockets.You will need to take the apart the slate, legs, rails, and the felt, then reassemble them at the intended destination. A pool table is not meant to be moved in one piece, with the exception of the cheap non-slate one mentioned above. The most engaging and important part is dismantling the table.Measure the exits and doorways to ensure safe movements without damaging any part of your table.The right equipment includes socket wrench, screw driver, drill, and staple remover for the felt. First, you need the right tools to dismantle the table.So how do you disassemble them in readiness for moving? Moving the Standard Slate Pool TableĪway from the mechanized pool table, most pool fanatics will likely buy the standard slate pool table for their home use. It is recommendable that you leave it to professionals for best results. The mechanized/coin-operated table may not be of high maintenance as the normal slate pool table, but moving it can be somewhat of a challenge. You do not want to tamper with the ball return mechanisms unless you are a professional. However, for a normal coin-operated table, once you take apart the rails and the legs, you should stop there and move it like that. In fact, some even come with folding legs for easier transportation. They are cheap and not suitable for disassembly. In such cases, the table should be transported in one piece.
Some non-slate tables may be made of wood, fiberboard, or some other non-slate material. If you must touch it, let it be an older table whose system is simpler. If you have no experience, just leave it intact and transport it that way. You must be very careful in how you handle the ball return system. Then, turn the table upside down and unbolt the legs. You will need a wrench to remove bolts attached to the rails so that the rails can come out easily. The first thing you have to do is taking apart the legs and rails of your non-slate table. Below is a simplified method of taking a part the mechanized table for easier transportation. Thus, taking it apart for transportation is also a little difficult. Moving a Coin-Operated TableĬompared to the slate pool tables, a coin-operated pool table is quite complex in its layout. Well, the white ball follows its own route where it can be retrieved separately without any coin insertion. You may be wondering what happens to the white ball when it is potted. This means that each time you want to play a new game, a coin must be inserted to release the balls. Simply put, this is a kind of pool table where a coin is deposited into a designated coin pockets to allow the balls to be released after every game.
This article discusses how to move the mechanized table, how to disassemble its counterpart the slate pool table for moving, and other related questions. So, is it possible to move this coin-operated pool table, and if possible, how do you move it? Yes, it is possible to move this kind of pool table by first disassembling certain parts to be assembled later. Nonetheless, whether you own one for commercial purposes or just for fun at home, a situation might arise that you want to move it to a different location.
Though they are not so common for people that want a private pool at home, it is not unheard of to find a pool fanatic having one at home. Mechanized/coin operated pool tables are mostly found in bars.